Shelf set ST 920х460 МКD-10

The shelf kit ST MKD-10 produced by UHL-MASH is an additional set of construction elements. They are intended for installation on dismountable metal shelves. If the number of shelves in the standard configuration no longer meets your needs, we recommend the ST MKD-10 shelf kit. Expanding the section optimizes storage in the workshop. In this case, there is no need to purchase a new shelf. The additional shelf and supports can withstand the same load as the standard model – 80 kg. Let's take a closer look at the features of the kit.

Which shelves the shelf kit is suitable for

The ST MKD-10 shelf kit is used with metal shelves of the MD series from UHL-MASH. The shelves of such storage units are made of particle board with a thickness of 10 mm. The material effectively withstands the stated loads. It does not require careful maintenance or specific usage conditions. The width of the shelf units from the kit is either 300 or 400 mm, while their length is the same – 970 mm. The kit is available in two options: standard and reinforced construction.

The shelf kit includes:

• board (material particle board);
• cross beams – 2 pcs.;
• longitudinal beams – 2 pcs.;
• reinforcement edge for the reinforced shelf – 1 pc.

The metal parts of the kit are painted with powder coating in light gray color (Ral 7035). The particle board elements do not require additional processing. Support edges with corners are run along the posts, and hooks for fastening to the shelf posts are cut at the edges. This design helps to avoid the use of fasteners. In the middle of the posts, perforations are provided for additional bolts to strengthen the structure. The reinforcement edge has special grooves for fastening. The shelf kit can be purchased together with the MD series shelf or bought separately.

To place an order, contact a UHL-MASH representative by phone, as indicated on the website, or leave a request on the website. The manager will assist with the selection and arrangement of delivery.